Waterproof Air Source Heat Pump Underfloor Heating , Air Exchange Heat Pump
Air Source Heat Pump Underfloor Heating Introduction
- Air source heat pump The cold (hot) water unit adopts modular design. It does not need to set up a standby unit. During the operation, the computer automatically controls and adjusts the running status of the unit to make the output power adapt to the working environment.
- The performance of air source heat pumps will vary with outdoor climate changes.
- In places where the outdoor air temperature in the north of China is low, an auxiliary heater is required due to insufficient heat supply in the winter of the heat pump.
Air Source Heat Pump Underfloor Heating Features
It adopts Copeland compressor and operates in an ultra-wide range.
◆The reverse flow circuit is arranged to ensure the subcooling degree of the refrigerant, which effectively improves the heating efficiency and the normal operation of the unit at low temperature.
◆ It operates under ultra-low temperature conditions and can work normally at -25 °C.
◆ Energy efficiency guarantee, solve the common problem of low temperature, no heat, low energy efficiency.
Air Source Heat Pump Underfloor Heating Parameters
code name.pdf
| Model |
SLNA-007UM |
| Compressor capacity |
2HP |
| Function |
Heating and Cooling |
| Electricity |
220V-1N-50Hz |
| Working conditions |
℃ |
-25~～+45 |
| Data |
Heata |
Nominal capacity |
KW |
3.9 |
| Input power |
KW |
1.69 |
| COP |
/ |
2.3 |
| Heating IPLV(H) |
2.53 |
| Coolb |
Nominal capacity |
KW |
4.4 |
| Input power |
KW |
1.69 |
| COP |
/ |
2.6 |
| Cooling IPLV(C) |
2.7 |
| A7W35c |
KW/COP |
6.4/4.1 |
| A2W35 |
KW/COP |
5.8/3.6 |
| A-7W35 |
KW/COP |
4.3/2.7 |
| A-15W55 |
KW/COP |
3.4/1.9 |
| A-20W45 |
KW/COP |
2.9/1.94 |
| Max. running currency |
A |
13.2 |
| Compressor quantity |
set |
1 |
| Refrigerant/charging quantity kg |
/ |
R404A/2.2 |
| Air blow type |
/ |
Side |
| Water pipe diameter |
inch |
G1〞 |
| Rating flow |
m³/h |
1.6 |
| Water side pressure loss |
kPa |
≤35 |
| Noise level |
dB(A) |
59 |
| Overall dimensions(L×W×H) |
mm |
1087×435×901 |
| Weight |
kg |
70 |
a: Nominal heating conditions: ambient dry bulb temperature-12℃, wet bulb temperature-14℃, outlet water temperature 41℃, water flow 0.172 * nominal heating capacity
b:Nominal refrigeration conditions: ambient dry bulb temperature 35℃, outlet water temperature 7℃, water flow 0.172 * nominal cooling capacity
c:A7W35 working condition: inlet air temperature 7℃, outlet water temperature 35℃
Yushen Products Advantages
1. More than 6 million M2 heating area project cases all over the different latitude area.
2.Automatic testing line,100% finished products testing
3. long heating time and less defrosting time,35% more powerful than other products
Product Tags:
|
|
Waterproof Air Source Heat Pump Underfloor Heating , Air Exchange Heat Pump Images
|
